Aurora Industrial Machining

(716) 821.5921

Custom Engineered, Shell & Tube, Heating Exchangers

TEMA Type BEU or AEU

Construction:

  • Removable bundle
  • U-tube
  • Full floating bundle
  • ASME and TEMA "B", "C" or "R" construction

Application:

  • Recommended for gas & liquid services.
  • For oil and other viscous fluid heaters with steam on the tube side.

Advantages:

  • No packed joint to leak and contaminate fluid
  • Gasketed joints are minimized
  • Provides multi-pass tube designs
  • U-bends allow for differential thermal expansion
  • Less costly than packed floating head or floating head designs, especially for higher tube side pressures since there is only one tubesheet, shell flange and head

Limitations:

  • Should be avoided where the tube side fluid is dirty or fouling since tubes can only be cleaned by chemical means.
  • True counter-current flow cannot be obtained since single pass on the tubeside is not possible.
  • Cannot be used where a temperature cross exists.

General Specifications:

Shell Side:
Pressures: 150 PSIG standard, up to 1200 psig available
Temperatures: 300 degrees F standard, up to 600 degrees F available

Tube Side:
Pressures: 150 PSIG up to 3000 PSIG
Temperatures: 300 degrees F standard, up to 600 degrees F available

Contact us to get a quote.

Site Information

3380 North Benzing Road | Orchard Park, New York 14127 | Tel: 716.826.7911 | Fax: 716.827.1041 | Email: info@auroraindustrialmachining.com

 

Copyright ©2012 Aurora Industrial Machining